BodyCraft TR1140 Owner's Manual

TR1140, TR1160, TR1180 OWNER’S MANUAL IMPORTANT： For maximum effectiveness and safety, please read this owner’s manual before using your Bo

9 *** THE TREADMILL CIRCUIT BREAKER WILL SHUT OFF POWER WHEN THE ELECTRIC CURRENT IS OVERLOADED. A. Pull out the plug from the electrical socket

10 NOTICE : The treadmill should be placed on a level surface. If the treadmill is not level, the belt will continuously track to low side of t

11 WALKING BELT CENTERING The walking belt may occasionally need to be centered. First be certain that the belt is tensioned properly. Start the t

12 WARNING: ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET BEFORE CLEANING, LUBRICATING OR SERVICING THE UNIT. CLEANING General cleani

13 WALKING BELT AND DECK LUBRICATION It’s important to take good care of your treadmill deck (the walking surface underneath the belt), because t

14

15 BEFORE STARTING Straddle the belt and stand on the plastic side rails. Place the safety key onto the circle on the overlay and attach the ro

16 INCLINE +: Increases the incline. This button is also used to scroll the programs. INCLINE -: Decreases the incline. This button is al

17 SPEAKER FUNCTION The user can connect a MP3 or IPOD with the internal speakers using the included speaker wire. LCD DISPLAY

18 DISPLAYS DOT MATRIX: The 8 X10 dot matrix reflects incline on the elevation programs (Program 1-4) and speed on the speed programs (Program 5-6

1 1. It is the responsibility of the owner to be sure that all users of this treadmill are informed of all warnings and precautions.

19 OPERATION INSTRUCTION (Please read carefully before using the treadmill): Safety Tips: To Start attach the safety key to the monitor. The

20 P-4 Calorie Burn : This is an interval elevation program where the elevation alternates between 0% and 3%. The user controls the speed. P-

21 U-1/U-2 User Programs: After selecting one of the user programs, press ENTER to confirm. Adjust the speed and incline for segm

22

23 ]

24

25

26

27 BEFORE STARTING Straddle the belt and stand on the plastic side rails. Place the safety key onto the circle on the overlay and attach the ro

28 INCLINE +: Increases the incline. This button is also used to scroll the programs. INCLINE -: Decreases the incline. This button is al

2 12. Remove the safety key and store it away in a safe place when the treadmill is not in use. Keep the safety key away from children. 13. We

29 SPEAKER FUNCTION The user can connect a MP3 or IPOD with the internal speakers using the included speaker wire. LCD/LED DISPLAY

30 DISPLAYS DOT MATRIX : The 8x10 dot matrix reflects incline on the elevation programs (Program 1-4, 7, 10-11) and speed on the speed programs

31 OPERATION INSTRUCTION (Please read carefully before using the treadmill): Safety Tips: To Start attach the safety key to the monitor. The

32 P-4 Calorie Burn : This is an interval elevation program where the elevation alternates between 0% and 4%. The user controls the speed. P-

33 P-12 Target Distance: This program counts down the distance goal that the user sets before exercising. After confirming the program, the use

34 HR-1 Weight Loss Heart Rate Program: The user must wear the heart rate chest strap to use this program. After the program is confirmed, AGE a

35 Odometer: An odometer showing accumulated distance will appear in the time window for one second when the safety key is placed on the monitor.

36

37

38

3 STEP 1 Do not move the treadmill out of the box until unit is assembled. Collapse box bottom and lay sides down before assembly.

39 BEFORE STARTING Straddle the belt and stand on the plastic side rails. Place the safety key onto the circle on the overlay and attach the ro

40 INCLINE +: Increases the incline. This button is also used to scroll the programs. INCLINE -: Decreases the incline. This button is al

41 SPEAKER FUNCTION The user can connect a MP3 or IPOD with the internal speakers using the included speaker wire. LCD/LED DISPLAY

42 DISPLAYS DOT MATRIX : The 10x12 dot matrix reflects incline on the elevation programs (Program 1-4, 7, 10-11) and speed on the speed programs

43 OPERATION INSTRUCTION (Please read carefully before using the treadmill): Safety Tips: To Start attach the safety key to the monitor. The

44 P-4 Calorie Burn : This is an interval elevation program where the elevation alternates between 0% and 4%. The user controls the speed. P-

45 P-12 Target Distance: This program counts down the distance goal that the user sets before exercising. After confirming the program, the use

46 HR-1 Weight Loss Heart Rate Program: The user must wear the heart rate chest strap to use this program. After the program is confirmed, AGE

47 Metric/Miles: If you want the treadmill to display the values in kiolmeters, you can switch to kilometers as follows: 1. During the power ON -

48

4 STEP 2 Lift up the upright handlebar, then fasten the screws (C) and washer (D) tightly at the bottom of the upright handlebar. (Figure 2)

49

50

51

52

53 PROBLEM POSSIBLE CAUSES CORRECTION Treadmill will not start 1. Not plugged in. 2. Safety key not attached correctly. 3. Treadmill circuit br

5 STEP 3 Attach the console to the upright by pressing both handlebars down. Place the washers (D) and screws (C) on the handlebar as shown in Fi

6 STEP 4 Attach upright side cap (B) with screws (E) at the bottom of the upright handlebar, and tighten them well. (Figure 4)

7 STEP 5 Attach book rack (J) with screws (F) at the bottom of the computer, and tighten them well. (Figure 5)

8 FOLDING After assembly is complete, you may fold the machine into the upright position for storage. To fold the machine, raise the deck unti